BR-series Reactor

Home > Products > Stainless steel reactor > BR-series Reactor >

BR-500 High Pressure Reactor

Pressure max.200 bar, Reactor Vessel Volume approx. 630 ml

Model: BR-500

Order NO.:


Specific parameters will be adjusted according to product upgrades, without notice.

Quotation Request



This high-pressure reactor is attractive due to its many stirring and heating variants. It is available in stainless steel 1.4571 (SUS 316LTI), Hastelloy C-22, or with PTFE lining on all sides. The usable volume of the reactor can be varied between 310 ml and 600 ml using different reactor vessels.

The BR-300/500 high-pressure reactor is notable for its ease of handling. The reactor is closed using a manual quick closure that can be attached without the use of tools. The reactor seal is established using a conical flange lock and O-ring seal of PTFE, FKM, or FFKM. The appropriate fitting inserts are available in stainless steel 1.4571 (SUS 316LTI) or Hastelloy C-22. A total of 6 connection options are provided in the lid, which can be selected from the following:
* Immersion tube for temperature probe
* Rupture disc of metal for safe limitation of the maximum pressure
* Pressure display 1 vent valve
* Vent valve
* 2 freely configurable fittings, for example for a gas sampling

Temperature is regulated using a temperature probe which detects the inner temperature of the reactor in an immersion tube. A second temperature probe can optionally be used as an independent overheating safety.

* 300, 350, 500, 600ml / 200 bar / 300℃ (PTFE-Lined 230° )
* Quick closure ring, to be operated manually without tools
* O-seal ring made of Viton®, PTFE or Kalrez®
* Either with PTFE-insert or completely made of SUS 316LTl or Hastelloy®
* Heating and stirring by laboratory hot-plate with integrated magnetic stirrer (only 300-350ml)
* Heating by elctrical or thermostated mantle
* Stiring by magnetic clutch and separate drive
* Optionally internal heating/cooling coil
* Optionally 2'nd thermocouple

Technical Specification BR-500



SUS316Ti or HC


Temperature max.



Pressure max.

200 bar


Reactor Vessel


approx. 630 ml


Inner Diameter

68 mm


Inner Height

175 mm



approx. 6 kg


TFMTM-PTFE Insert* (integrated)



approx. 500 ml

Inner Diameter


62.5 mm

Inner Height


165 mm


Standard Armatures

Rupture Disc, Dip Tube, Valve, Tool


Pressure Measurement

analog and/or digital


Ports (total)



Ports (free)



Type of connection

8 mm Tube Connection


Heating Systems (optional)

Electrical Heating mantle



Julabo thermostat



Heating Coil



Magnetic stirrer

BLH-800 / 801


Overhead stirrer with magnetic clutch

WB20C and RV 100-SS



Pneumatic bench-top stand (with overhead stirrer)

Stand for BR-500 lid (with magnetic stirrer)

* When using PTFE inserts the maximum allowable temperature is 230℃
** The number of free ports can be enlarged by the use of T-connections



  • ChemTron Germany

  • Add:Gässlesweg 22-24, 75334 Straubenhardt
  • Tel.: +49 7248 4529088
  • E-mail:

  • ChemTron Switzerland

  • Add:Sarbach 5 CH-6345 Neuheim, Switzerland

  • ChemTron Italy

  • Add:Strada Romano di Sopra, 2/C 06132 - San Martino in Campo, Perugia (PG)

  • ChemTron China

  • Add:Room 303, Hall C, Office Building M8, No. 1 Jiuxiangqiao East Road, Chaoyang District, Beijing
  • Tel.: +86 400-650-2011

About Contact Statement Privacy Policy

Copyright © 2021 ChemTron. All rights reserved.